Product Center
-
Hydrological equipment monitoring station
-
Water Quality Monitor Sensor
-
Plant protection equipment
-
Food Testing Equipment
- 4G - Empowered Soil Temperature and Moisture Meter
- GNSS Receivers: Empowering Precise Positioning and Disaster Monitoring
- Want to know the actual moisture condition of the land? Try this Soil Temperature and Moisture Meter!
- GNSS Monitoring Station: Unleashing Multifaceted Dam Protection
- Soil pH test: Conventional Approaches and Portable Solutions
- COD, Ammonia Nitrogen and Total Phosphorus Detection: From Lab - bound to Smart On - site Analysis
Shandong Fengtu IOT Technology Co., Ltd
Sales Manager：Ms. Emily Wang
Tel, Whatsapp：+86 15898932201
Email：info@fengtutec.com
Add：No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
blue-green algae analyzer
Model：FT-SS16S
Brand：fengtu
Get a Free QuoteRelated products
Product details
1.Product introduction of Blue-Green Algae Sensor
blue-green algae analyzer is widely used for on-site portable monitoring of blue-green algae in aquaculture, sewage treatment, surface water, industrial and agricultural water supply and drainage, domestic water, etc.Blue-Green Algae Sensor is an electrode method water quality analysis instrument that uses fully digital electrode detection to detect blue-green algae parameters of water quality. The instrument is equipped with the self-developed ftiot operating system, which is simple to operate, has stable performance, accurate measurement, and wide detection range. It has a built-in high-capacity rechargeable lithium battery, making it convenient for users to conduct water quality testing at any time in the field or laboratory.
2.Blue-Green Algae Sensor host parameters
| Charging input voltage | 4.5V-5.5V |
| Charging current | <2A |
| screen size | 3.5 inches |
| screen resolution | 480*800☆ |
| screen interface | MIPI DSI☆ |
| USB interface | 2 (Supports external expansion of mouse, keyboard, 4G, etc.)☆ |
| Type-C | 1 (Supports external expansion of mouse, keyboard, 4G, etc.)☆ |
| RS485 | 2 (Supports Modbus, json, asc input, etc.) |
| External sensor supply voltage | 12V |
| External sensor supply current | 1A |
| operating system | ftiot (based on Linux-5.4)☆ |
| CPU | 2*Cotex-A7, 650Mhz☆ |
| RAM | 512M DDR3☆ |
| Flash | 8G-64G |
| OpenGL | ES 2.0☆ |
| Wifi | support |
| 4G | Optional |
| button | support |
| capacitive touch screen | support |
| software architecture | B/S☆ |
| web access | Support☆ |
| MTP mode | Support☆ |
| Multiple terminal login | Support☆ |
| IPV6 | Support☆ |
| Sensor communication method | RS485, TCP, UDP, HTTP☆ |
| Data forwarding method | RS485, TCP, UDP, HTTP☆ |
| Remote SSH | Support☆ |
| remote debugging | Support☆ |
3. Blue-Green Algae Sensor sensor parameters and configuration
| serial number | name | Measuring range | principle | Measurement accuracy | resolution | Configuration | Remark |
| 1 | temperature | 0~50℃ | High-precision digital sensor | ±0.3℃ | 0.01℃ | ||
| 2 | pH | 0~14(ph) | Electrochemistry (Salt Bridge) | ±0.1PH | 0.01 | ||
| 3 | ORP | -1500mv~1500mv | Electrochemistry (Salt Bridge) | ±6mv | 1mV | ||
| 4 | Conductivity | 0~5000uS/cm,0~10000uS/cm | contact electrode method | ±1.5% | 1uS/cm | ||
| 5 | TDS | 0-10000ppm 0-200ppt | contact electrode method | ±1.5%; ±0.1°C | 1ppm 0.01ppt | ||
| 6 | salinity | 0-10000ppm 0-200ppt | contact electrode method | ±1.5%; ±0.1°C | 1ppm 0.01ppt | ||
| 7 | Sludge concentration | 0～20.000g/L | scattered light method | ±5% (depending on sludge homogeneity) | 0.001g/L | ||
| 8 | Turbidity | 0~40NTU (low turbidity) | scattered light method | ±1% | 0.1NTU | Optional | |
| 0~1000NTU (medium turbidity) | scattered light method | ±1% | |||||
| 0~3000NTU (high turbidity) | scattered light method | ±1% | |||||
| 9 | Dissolved oxygen | 0~20mg/L | fluorescence lifetime method | ±2% | 0.01mg/L | ||
| 10 | Ammonia nitrogen | 0~100mg/l | Ion selective electrode method | ±1mg | 0.01mg | ||
| 11 | suspended solids | 0~2000mg/L | scattered light method | ±5% (depending on sludge homogeneity) | 0.1mg/L | ||
| 12 | Residual chlorine | 0~5.00mg/L | Ion selective electrode method | ±5% of reading | 0.01mg/L | The accuracy is best when the flow rate is 0.42m/s-0.85m/s. | |
| 13 | Chloride ion | 0-3500.0mg/L | Ion selective electrode method | ±5% | 0.1mg/L | ||
| 14 | Total hardness | 0～1000.0mg/L | Ion selective electrode method | ±10% of reading | 0.1mg/L | ||
| 15 | cod | 0~500mg/L | UV254 absorption method | ±5% | 0.1mg/L | COD and chlorophyll are equipped with automatic cleaners to prevent biological adhesion and avoid light window pollution to ensure long-term monitoring is still stable; the automatic cleaning time and cleaning frequency can be set, and the power consumption is 0.7W | |
| 16 | Chlorophyll | 0~400ug/L | Fluorescence method | R2>0.999 | 0.01ug/L | ||
| 17 | blue-green algae | 0～200.0Kcells/mL | Fluorescence method | R2>0.999 | 0.1Kcells/mL | ✔ |
本文地址：https://fengtusz.com/Portable-Water-Quality-Monitor/blue-green-algae-analyzer.html
- Previous Article ：Portable Water Quality Meters
- Next Article：Oil In Water Sensor
Related article
-
Facility Agricultural Weather Stations Promote Smart Agriculture
2024-06-27 -
Rotecting Tailings Ponds: Identifying Hazards and Applying GNSS, Seepage, and Water Level Monitoring
2025-02-05 -
The Significance and Advantages of River Flow Velocity Measurement and Monitoring System
2024-11-12 -
Fengtu Soil pH Tester: Integrated & Reliable
2025-03-07 -
Miniature automatic water quality monitoring stations for agriculture
2024-06-26 -
Intelligent Agricultural Weather Station Manufacturer Introduction
2024-07-12 -
Smart agro-weather station monitoring programme
2024-06-18 -
Water quality multi-parameter analyzer can be used for fishery farming, water monitoring ......
2024-07-19
