Product Center
-
Hydrological equipment monitoring station
-
Water Quality Monitor Sensor
-
Plant protection equipment
-
Food Testing Equipment
- 4G - Empowered Soil Temperature and Moisture Meter
- GNSS Receivers: Empowering Precise Positioning and Disaster Monitoring
- Want to know the actual moisture condition of the land? Try this Soil Temperature and Moisture Meter!
- GNSS Monitoring Station: Unleashing Multifaceted Dam Protection
- Soil pH test: Conventional Approaches and Portable Solutions
- COD, Ammonia Nitrogen and Total Phosphorus Detection: From Lab - bound to Smart On - site Analysis
Shandong Fengtu IOT Technology Co., Ltd
Sales Manager：Ms. Emily Wang
Tel, Whatsapp：+86 15898932201
Email：info@fengtutec.com
Add：No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Aquaculture Water Quality Monitor
Model：FT-SS03A
Brand：fengtu
Get a Free QuoteRelated products
Product details
1. Product introduction of Aquaculture Water Quality Monitor
Aquaculture Water Quality Monitor is used to monitor aquaculture water quality such as water temperature, orp, PH and other parameters to improve aquaculture water quality.SS03A model Aquaculture Water Quality Monitor is an electrode method water quality analysis instrument that uses fully digital electrode detection to detect water quality, water temperature, ORP, and PH parameters.The instrument is equipped with the self-developed ftiot operating system, which is simple to operate, has stable performance, accurate measurement, and wide detection range.It has a built-in high-capacity rechargeable lithium battery, making it convenient for users to conduct water quality testing at any time in the field or laboratory.
2.Aquaculture Water Quality Monitor host parameters
| Charging input voltage | 4.5V-5.5V |
| Charging current | <2A |
| screen size | 3.5 inches |
| screen resolution | 480*800☆ |
| screen interface | MIPI DSI☆ |
| USB interface | 2 (Supports external expansion of mouse, keyboard, 4G, etc.)☆ |
| Type-C | 1 (Supports external expansion of mouse, keyboard, 4G, etc.)☆ |
| RS485 | 2 (Supports Modbus, json, asc input, etc.) |
| External sensor supply voltage | 12V |
| External sensor supply current | 1A |
| operating system | ftiot (based on Linux-5.4)☆ |
| CPU | 2*Cotex-A7, 650Mhz☆ |
| RAM | 512M DDR3☆ |
| Flash | 8G-64G |
| OpenGL | ES 2.0☆ |
| Wifi | support |
| 4G | Optional |
| button | support |
| capacitive touch screen | support |
| software architecture | B/S☆ |
| web access | Support☆ |
| MTP mode | Support☆ |
| Multiple terminal login | Support☆ |
| IPV6 | Support☆ |
| Sensor communication method | RS485, TCP, UDP, HTTP☆ |
| Data forwarding method | RS485, TCP, UDP, HTTP☆ |
| Remote SSH | Support☆ |
| remote debugging | Support☆ |
3.Aquaculture Water Quality Monitor sensor parameters and configuration
| serial number | name | Measuring range | principle | Measurement accuracy | Configuration | Remark |
| 1 | temperature | 0~50℃ | High-precision digital sensor | ±0.3℃ | ✔ | |
| 2 | pH | 0~14(ph) | Electrochemistry (Salt Bridge) | ±0.1PH | ✔ | |
| 3 | ORP | -1500mv~1500mv | Electrochemistry (Salt Bridge) | ±6mv | ✔ | |
| 4 | Conductivity | 0~5000uS/cm,0~10000uS/cm | contact electrode method | ±1.5% | ||
| 5 | TDS | 0～20μS/cm (TDS 0-10mg/L) | contact electrode method | ±1.5% | ||
| 6 | salinity | 0-2.5ppt or 0-80ppt | contact electrode method | ±0.05ppt or ±1ppt | ||
| 7 | Sludge concentration | 0～20.000g/L | scattered light method | ±5% (depending on sludge homogeneity) | ||
| 8 | Turbidity | 0~40NTU (low turbidity) | scattered light method | ±1% | Optional | |
| 0~1000NTU (medium turbidity) | scattered light method | ±1% | ||||
| 0~3000NTU (high turbidity) | scattered light method | ±1% | ||||
| 9 | Dissolved oxygen | 0~20mg/L | fluorescence lifetime method | ±2% | ||
| 10 | Ammonia nitrogen | 0~100mg/l | Ion selective electrode method | ±1mg | ||
| 11 | suspended solids | 0~2000mg/L | scattered light method | ±5% (depending on sludge homogeneity) | ||
| 12 | Residual chlorine | 0~5.00mg/L | Ion selective electrode method | ±5% of reading | The accuracy is best when the flow rate is 0.42m/s-0.85m/s. | |
| 13 | Chloride ions | 0-3500.0mg/L | Ion selective electrode method | ±5% | ||
| 14 | Total hardness | 0～1000.0mg/L | Ion selective electrode method | ±10% of reading | ||
| 15 | cod | 0~500mg/L | UV254 absorption method | ±5% | COD and chlorophyll are equipped with automatic cleaners to prevent biological adhesion and avoid light window pollution to ensure long-term monitoring is still stable; the automatic cleaning time and cleaning frequency can be set, and the power consumption is 0.7W | |
| 16 | Chlorophyll | 0~400ug/L | Fluorescence method | R2>0.999 |
本文地址：https://fengtusz.com/Portable-Water-Quality-Monitor/Aquaculture-Water-Quality-Monitor.html
- Previous Article ：Portable Chlorophyll Meter
- Next Article：Aquaculture monitoring system
Related article
-
Introduction of Fengtu Small Portable Automatic Weather Station
2024-07-23 -
COD water quality online automatic analyser
2024-07-11 -
Soil pH test: Conventional Approaches and Portable Solutions
2025-03-27 -
Automatic Farmland Weather Station, making agriculture smarter and more precise
2024-09-09 -
What is the radar hydrometer range?
2024-05-23 -
Automatic Water Quality Monitoring Floating Station Product Introduction
2024-05-21 -
Digital Farm Monitor, a hand-held weather station
2024-08-02 -
High-standard farmland construction equipment - crop growth (seedling) monitoring and diagnostic instrument
2024-05-28
